The DETER System Programming Interface

Introduction

The DETER System Programming Interface (SPI) is a standard interface for manipulating fundamental DETER abstractions used to manage testbed resources and to marshall those resources into network and cybersecurity experiments. The SPI is analogous to an operating system's system call interface. It provides the fundamental abstractions that enable application programmers to make tools that are useful to researchers.

There are two motivations for building the SPI: first that the SPI is a context and programming framework for new DETER abstractions that subsumes the existing Emulab codebase cleanly. Second the SPI provides a context in which new developers can extend those abstractions to provide new functionality and to improve their scaling properties.

The SPI is fundamentally a tool-builder's interface. Researchers performing experiments or students performing class exercises are unlikely to access SPI methods directly, though we expect that higher level tools and interfaces will make the fundamental abstractions visible.

The Fundamental Abstractions

There are 6 first class abstractions that make up the DETER SPI. These are:

Users

A researcher who builds and carries out experiments using resources controlled by the testbed.

Projects

Administrative groupings of users that embody the trust chains that underly researcher access. A researcher has access to the testbed as a whole because they are a member of an approved project. Trusted users can add other users to an approved project, reducing the administrative overhead.

Circles

Groupings of trusted users that embody the sharing of data and resources among researchers. Adding or removing users from circles gives them permission to access resources in use for experimentation or excludes them from such resources.

Experiments

A description of a research activity. An experiment is composed of aspects, each of which embodies some facet of the activity. Currently the SPI recognizes 4 aspects:

• Layout: the arrangement and specification of an experiment's elements that make up the experimental apparatus
• Procedure: The steps taken to carry out an experiment
• Data Management: The resources and processes used to collect and process data generated by the experiment
• Constraints: Correctness requirements that must be met in a valid experiment.

Additional aspects can be specified by users and accessed by running experiments. We document a plug-in interface (below) that explains how new aspects can enter the system. Access to experiments and the resources attached to them is controlled by assigning rights to circles.

Libraries

Collections of experiments grouped by function or semantics. Libraries allow researchers to organize their experiments and share them with other researchers (by assigning rights to circles).

Realizations

A realization is the binding of resources to an experiment. Users can inspect and modify such bindings in carrying out their experiments.

We describe each of these in more detail below. They are interrelated and the descriptions link to one another in this document. We intend for readers to jump between sections to help intuition.

The Implementation

This section motivates and explains two of the implementation design decisions that underlie the SPI: expanding the implementation beyond the Emulab abstractions and implementation, and using SOAP and web services to deliver the service.

DETER Abstractions and the Existing Codebase

The DETER research agenda drives the new abstractions, and it differs somewhat from the abstractions that drive the Emulab-derived code base. DETER is interested in sharing experiment infrastructure - including conducting experiments where multiple parties manipulate the environment based on different views of the world and different goals (multi-party experiments). Also, DETER is interested in multi-fidelity, large-scale experiments where the representation of the various partes of the experiment is guided by the researcher's design of the experiment. Finally, we think of experiments as having aspects that go well beyond the definition of the topology or layout, and the abstractions need to support this.

The Emulab code is based on simpler topology and experimentation models, and while its developers have been able to extend it to do more, our changes take the abstractions far enough that relegating the Emulab code to allocating local resources seems the cleanest way forward. Functions including user and project management will move into the SPI, though subsets of that function (basically current Emulab functionality) will remain available through the legacy interface.

As a last practical point Emulab-based codebase blurs the lines of some implementations between the webserver interface and the backend code. Building the SPI offers DETER a chance to solidify that interface and enable developer to build multiple applications on the DETER abstractions.

Delivering the SPI Through SOAP

The SPI is built on the SOAP web services platform as a compromise between accessibility, extensibility, and support from tools. An important goal of the SPI is to allow multiple applications to use the DETER testbed. A web front-end for teaching cybersecurity classes that coexists with a web front end for experimenting on Internet anonymity are such a pair of applications. That may even look like two different testbeds from the outside.

To support that, the SPI must be platform independent. A web browser is a powerful application platform that the SPI must support. The SOAP/WSDL standards are a proven technology for such access. SOAP may be somewhat stodgier than a JSON/REST interface, but the differences can be constrained to encodings, and many tools for generating SOAP interfaces provide migration paths to other web services platforms.

Presently we take advantage of the fairly rich SOAP toolspace and have been able to use SOAP for access from a range of platforms from web browsers to multiple standalone programming languages.

The rest of this document goes into more detail on how to use the SPI.

Understanding The SPI

This section describes the SPI abstractions and operations that application writers will use. We are concerned with how to put the concepts into use and how they interrelate with each other. Below we describe the detailed interface.

Services

The SPI is broken up into services that implement the various abstractions. Each major abstraction presents its own service, and there are a few others for administration and information. Each service is a separate SOAP/WSDL service and has its own contact point. We break them up this way to keep the specification reasonably sized for both people and computers.

The services in the SPI are:

ApiInfo

Version information and test interfaces. Client and server certificate distribution.

Admin

Low level testbed administration

Circles

Manipulation of Circles

Experiments

Manipulation of Experiments

Libraries

Manipulation of Libraries

Projects

Manipulation of Projects

Users

Manipulation of Users

Profiles

A profile is a collection of metadata attached to an abstraction instance, primarily to help users and administrators understand what the instance is bing used for. Users, projects, circles, experiments, and libraries all have profiles attached to them which describe those things. For example, a user profile includes the researcher's name and an e-mail address.

Profiles are self-describing, so that applications have guidance is what is being presented and how to display it. Each of the abstractions above has an operation called getProfileDescription in its associated service that returns an array of all the valid fields - called attributes - in that abstraction's profile. Each element of that array - each attribute - includes additional metadata that describes its purpose and presentation:

Metadata	Meaning
Name	Descriptive name for the attribute, e.g. e-mail. All attributes have a name.
Value	The contents of the attribute. When retrieving a profile description, every attribute's value is empty
Description	Brief natural language description of the attribute, suitable for context sensitive help
Access	Whether a user can modify the data. Valid values are READ_ONLY, READ_WRITE, NO_ACCESS, and WRITE_ONLY
Optional	True if the field can be omitted in a profile. All non-optional fields must be present when creating an instance. Applications may expect these fields to be present.
DataType	How to interpret the data. Valid values are STRING, Int, FLOAT, and OPAQUE.
Format	A regular expression describing valid field entries. Applications can use this to check user input locally. Applications are not required to do so, but values for this attribute that do not match the expression will be rejected.
FormatDescription	A natural language description of valid input suitable for context sensitive help. The FormatDescription for a phone number field might be "10 digits, optionally separated by hyphens or parentheses."
LengthHint	A hint at how much space an application should to reserve for input, in characters. Applications can obviously ignore this.
OrderingHint	An integer that suggests to an application what order to display the field relative to others. Applications can ignore this

Each instance has an associated operation, getUserProfile (projects have getProjectProfile, experiments have getExperimentProfile) that returns the profile for that instance as an array of attributes, as above. This profile includes the values for all the (readable) attributes.

Each instance supports a changeUserAttribute operation that allows the application to change the instance's attribute values. changeUserAttribute is used to change a user's phone number. Optional attributes can be deleted through this interface.

An application will use the profile operations in the following ways:

• When creating an instance that requires a profile, the application will request the profile description using getProfileDescription, fill in non-optional fields (probably based on user input) and include that profile data with the creation request. All abstractions that have profiles attached require a valid profile as a parameter to the operation that creates them.
• When displaying an instance that supports a profile, the application may request the profiles for various instances using getUserProfile et al., and display all or some of the profile data.
• Applications that manage abstractions with profiles may allow users to change the contents of the profile using changeUserAttribute, et al.

There is an administrative interface for changing the attributes in each abstraction's profile, but we expect the profile contents to remain relatively constant over time.

Currently the attributes that DETERLab includes in abstraction profiles are as follows:

For users:

Attribute Name	Description	Optional	Access	DataType
name	Name	false	READ_WRITE	STRING
title	Title	true	READ_WRITE	STRING
email	E-mail	false	READ_ONLY	STRING
affiliation	Affiliation	true	READ_WRITE	STRING
affiliation_abbrev	Affiliation (abbreviated)	true	READ_WRITE	STRING
URL	URL	true	READ_WRITE	STRING
address1	Address	true	READ_WRITE	STRING
address2	Address Line 2	true	READ_WRITE	STRING
city	City	true	READ_WRITE	STRING
state	State	true	READ_WRITE	STRING
zip	Postal Code	true	READ_WRITE	STRING
country	Country	true	READ_WRITE	STRING
phone	Phone	false	READ_WRITE	STRING

All users are required to have a name, e-mail address, and a phone number present in their profile, but may only change the name and phone number. (The e-mail address is used to validate the accounts.)

The e-mail and phone number attributes have formats attached:

Name	Format	Format Description
email	[^\s@]+@[^\s@]+	A valid e-mail address
phone	[0-9-\s\.\(\)\+]+	Numbers, whitespace, parens, plus signs, and dots or dashes

Because we expect applications to edit user profiles, there is layout information as well:

Name	Ordering Hint	Length Hint
name	100	0
title	200	0
address1	500	0
address2	600	0
city	700	0
state	800	0
zip	900	0
country	1000	0
email	1100	0
URL	1200	0
phone	1300	15
affiliation	3000	0
affiliation_abbrev	4000	5

For Projects:

Attribute Name	Description	Optional	Access	DataType
description	Description	false	READ_WRITE	STRING
funders	Funders	true	READ_WRITE	STRING
affiliation	Affiliation	true	READ_WRITE	STRING
URL	URL	true	READ_WRITE	STRING

For Circles:

Attribute Name	Description	Optional	Access	DataType
description	Description	false	READ_WRITE	STRING
email	Email	true	READ_WRITE	STRING

For Experiments:

Attribute Name	Description	Optional	Access	DataType
description	Description	false	READ_WRITE	STRING

For Libraries:

Attribute Name	Description	Optional	Access	DataType
description	Description	false	READ_WRITE	STRING

Users

A user represents a researcher using the testbed. Most operations in the SPI are carried out on behalf of a user. Users must authenticate themselves to the testbed in order to carry out such operations. Users own other instances, for example a user owns experiments or projects that they create. Ownership is both an auditing construct - the testbed can determine which researcher configured which objects - and through policy assigns some rights to carry out operations. The owner of an experiment has rights outside those specified by the circles the owner belongs to.

Each user has a unique identifier, a textual userid. Permissions, resources, objects, etcetera are all bound to that userid. A userid is a text string that uniquely identifies a user. A userid cannot contain the colon character (:) nor can it conflict with other userids or projectids.

A user creates a namespace for circles, experiments, and libraries. Instances of each of those abstractions are names as namespace:name. A user with userid u can create experiments with names of the form u:experiment. This allows each user to manage their own names without introducing ambiguity when another user creates an experiment with the same name. Applications are welcome to hide the prefix on such names, except when needed to resolve an ambiguity. In such a case, teh application may display only the parts of experiment names after the colon to user u unless that user also has access to another user's experiment with the same name after the colon. Such an application might display an experiment list to user u that looks like:

Experiment Name
myworm
DDoS
bob:mytest1
u:mytest1

Most experiments are unambiguous, but because u can see the experiment that user bob called mytest1 and the experiment that u called mytest1, the application presents the prefixes as well.

Authentication

Authentication is the problem of binding a request to a userid.

In order for a user to carry out operations on the testbed, the user must log in to the testbed. When requests are made to the SPI they are made through a secure connection where client and server (that is user and testbed) are identified by an X.509 certificate issued by the testbed. The login process binds an X.509 certificate used to make a secure connection to a userid in the testbed used to determine rights. Users are authenticated through a password system.

The simplest way to log in through the SPI is to call the requestChallenge operation on the Users service. The caller specifies the sorts of challenges it can carry out and the server sends the input for such a challenge. Challenges can include hashing passwords and other mechanisms. Because the challenge and its response are passed through encrypted channels, we also support a clear challenge. In a clear challenge the caller submits a password in the clear. Each challenge is valid for a limited time - 2 minutes - and has a unique identifier so a response is bound to a specific challenge.

Once the caller gets a challenge, it calculates the response and replies to the challenge by calling challengeResponse on the Users service. If successful, the user is logged in and can begin carrying out operations.

The login process binds a user to an X.509 certificate, so the certificate and the challenge response need to work together. There are two ways to do this: if the user has no X.509 certificate from the testbed, the challengeResponse request can be made without a client certificate. In that case, the result of a successful challenge will include a signed certificate and a private key in PEM format that the user can use for future communications. The key is unencrypted, and it is the responsibility of the client to properly protect it.

If the user has an X.509 certificate - say from a previous successful challengeResponse exchange - the user can make the challenge response connection with that certificate, and the certificate/user binding will be complete and no new certificate created.

In either case, connections made with that X.509 client certificate will be treated as from the user until the user logs out using the logout operation on the Users service, logs in as another user as above, or the login times out in 24 hours.

Some web applications have trouble adding an X.509 certificate on the fly - especially those that run in browsers. To simplify the development of those applications, there is an operation in the ApiInfo service called getClientCertificate that returns a certificate issued by the testbed and an unencrypted private key, both in PEM format. This interface does not require a login and can be accessed through most web browsers, enabling a user to cut and paste the certificate into a local file for use with applications. The certificate is not logged in.

Additionally, a user can always get the server's certificate to check or add to a trusted servers file using getServerCertificate from the ApiInfo service.

Applications will have to carry out these challenges before doing anything else and can choose to log users out as well.

Profile Management

The Users service supports the operations described in the profiles description to allow applications to manipulate user profiles.

Notifications

Many operations in the SPI require a user to agree with the operation before the operation becomes final. Users who wish to join a project or a circle request permission from the users who own or administer them. Administrators who wish to add users to their circles request confirmation from the users. Basically any operation that expands the rights of users requires the users in question to concur. In order to let users know when such changes are pending or desired, the SPI supports a system for managing short messages available through the Users service.

Notifications are these short messages. Notifications are sent by the system in response to actions requiring confirmation. This is not a general inter-user messaging system.

A notification consists of a the text of the message a unique identifier for the message, and a set of flags. The valid flags are:

Flag Name	Meaning
Urgent	The message is more important than most messages
Read	The user has read this message

Each user has a queue of notifications they can access. The getNotifications operation on the Users service returns an array of notifications for an application to display. Notifications can be filtered by source and by flags. The flags can be set using the markNotifications operation that specifies notifications by unique ID.

Applications will use these operations to:

• Present a user with a list of pending notifications when a user logs in, or at regular intervals.
• Display urgent and other notifications differently.
• Allow users to read and respond to notifications by calling avrious SPI operations to confirm pending actions
• Search notifications for past actions
• Mark notifications as read once viewed and acted upon

Note that users generally cannot send notifications to other users. Only administrators and testbed actions do this.

Password Management

The Users service provides operations for managing a user's password. A user who is logged in can change their password directly using the changePassword operation. The operation takes a user identifier and a password. Administrators can also use that interface to change other user's passwords.

If a user cannot log in - for example their password has expired or they have forgotten it - the application can use the requestPasswordReset interface to issue temporary credentials that can be used to set a user's password to a known value. When requestPasswordReset is called the credentials are e-mailed to the user's e-mail address. That address is part of their required profile. The application can then gather a password from the user and call the changePasswordChallenge operation with the new passowrd and the temporary credentials from the e-mail. To make it easier for browser based applications to incorporate this interaction into their operations, requestPasswordReset takes a URL prefix that it can embed in the challenge it sends to the user, allowing the user to click on that URL in the mail to transfer the temporary credentials back to the application.

As an example of using the URL prefix, if a user forgets their password, the application can call requestPasswordChange with a URL prefix of https://myapp.example.com/resetpassword?challenge=. The user will get an e-mail including the link https://myapp.example.com/resetpassword?challenge=temporary_credentials that they can click on. That link will take the user back into the web-based application to a page that collects the new password. The app has the temporary credentials from the URL.

Creating New Users

To create a new account/user instance, an application calls the createUser operation from the Users service. The application must provide a valid profile, can provide a preferred user ID, and an application URL prefix.

The profile must have all non-optional fields present, and any fields having required formats correctly formatted. The application can get the profile requirements from the profile service. Note that all READ_ONLY fields are specified at this time - creation is when they are written.

The application can request a user ID if the user requests one. If that ID is already taken, the testbed will pick a similar one. If no ID is specified, a base user ID is generated from the required e-mail address and if that is taken, a similar one is generated.

The request can also include a URL prefix that works the same way as the URL prefix in the password reset interface. The user is created without a valid password, and the same sort of temporary credentials are issued and mailed to the user. A browser-based application can use the URL prefix to redirect the user back to the application to set their initial password.

Once the user is created through this interface, that user has very few rights because it is not a member of an approved project. It can reset its password and either create a project or attempt to join an existing one.

Administrative Operations

There are a few more operations that are restricted to administrators.

There are profile operations to add, remove and change attributes to the user profile schema.

There is an operation sendNotification to send a system notification to users.

There is an operation, createUserNoConfirm to create a new user instance with a valid password, without going through an e-mail confirmation to set a password.

These are documented below.

Projects

A Project is an administrative grouping of users that helps to scale testbed administration by allowing trusted users to add others to the testbed. Intuitively, a project collects users who are working on a particular research project. A user proposes such a project to the testbed administration. If the administration approves that project, the proposing user is granted the power to add other users to the project. Until a user is a member of an approved project, they have minimal rights on the testbed.

To make the distinction above explicit, projects can be in 2 states: approved and unapproved. All projects are initially unapproved. Members of unapproved projects gain no additional rights on the testbed. Once an administrator approves the project, the members gain broader rights. Approval is an explicit operation undertaken only in accordance with the testbed's real-world policies.

As users have userids, projects have projectids. A projectid is a text string that uniquely identifies a project. It cannot contain a colon, nor can it conflict with either another projectid or userid.

An approved project creates its own namespace for circles, experiments, and libraries in much the same way creating a user does. Users can be explicitly given the right to create circles, experiments, and libraries in the project's namespace. The SPI places no meaning on an instance created with a user name prefix rather than a project name prefix, but applications may.

A project also is linked to a circle named after the project. A project named myproject will have a linked circle myproject:myproject. The system keeps the membership of that circle and the project synchronized. By assigning rights to that circle, users can assign rights to all project members.

The operations on projects are controlled by the Projects service.

When a researcher joins the testbed by creating a user instance, one of the few operations the testbed will allow them to carry out is to propose a project. The intended workflow is that a researcher comes to the testbed, joins it by creating a user instance and then gains rights by proposing a project that is approved. Then that user (and other users to which it delegates rights) can administer access under that project.

Project Permissions

Any member of a project may have one or more of the following permissions that define the operations that user can carry out on the project itself. The permissions are:

Permission Name	Meaning
ADD_USER	This user may request that a user be added to the project or confirm a request by a user to join the project
CREATE_CIRCLE	This user may create a new circle in the project's namespace (a name prepended by projectid:)
CREATE_EXPERIMENT	This user may create a new experiment in the project's namespace (a name prepended by projectid:)
CREATE_LIBRARY	This user may create a new library in the project's namespace (a name prepended by projectid:)
REMOVE_USER	This user may remove a user from the project. Any objects they have created in the project's namespace remain

Creating A Project

A user creates a project using the createProject operation on the Projects service. Mechanically, the procedure to create a project is very similar to creating a user. An application will:

• Call the getProfileDescription operation on the Projects service to get an empty project profile
• Gather data from the user to fill in the project description, including non-optional fields and proper formatting
• Call the createProject with a project name from the user and that user as the project's owner. (Administrators can create projects owned by other users).

When createProject completes successfully, the project exists but is unapproved. An administrator can approve it by calling approveProject in the Projects service once the testbed's real-world criteria are met. An administrator may also call removeProject in the Projects service to remove an unapproved project. (removeProject also will remove approved projects, potentially removing many users' rights to operate on the testbed.)

Adding Users To A Project

Users can become members of a project by requesting to join or or by being invited to join. Because joining a project adds a user to the project's circle, that changes the rights of a user, so either of these routes must be endorsed by both the user and someone with relevant permissions in the project. The difference is only the order in which the endorsements are gathered.

When a user finds a project the would like to join, usually through some out of band mechanism, they call the joinProject operation on the Projects service. This registers the user's intention to join and sends a notification to members of the project who have the right to add users to it. This notification includes a challenge that is similar in format to the requestPasswordChange challenge. As with that operation, an application can include a URL prefix that will be prepended to the challenge in the notification.

One of the users receiving the notification can then call joinProjectConfirm with the challenge and a list of permissions that the user will be assigned. When that operation completes, the user is a member of the project with the associated rights. The user calling joinProjectConfirm must have the ADD_USER right and similarly cannot confer more rights than they have.

When a user with the ADD_USER permission wants to invite another user to join the project, the inviting user calls the addUsers operation with the projectid, a list of users, proposed permissions, and an a URL prefix that serves the same purpose as the prefix on joinProject. When the operation succeeds, each invited user receives a notification containing a challenge (and descriptive text about the project). If the invited user does wish to join, they call the addUserConfirm operation with the challenge. When that operation succeeds, they are a member of the project.

A user with the REMOVE_USER permission can unilaterally remove other users from the project by calling the removeUsers operation. The owner of a project cannot be so removed.

Project Ownership

When a project is created, an owner for that project is designated. It is generally the user who successfully called createProject, though ownership may be designated for projects created by administrators. The owner's identity may be a factor in project approval, depending on how the testbed is administered.

The owner controls the contents of the project profile and is the only project member who can remove the project from the system (though administrators can also do that).

The owner (and administrators) can change the owner of a project by calling the setOwner operation.

Changing Project Permissions

A user that has both ADD_USER and REMOVE_USER permissions to a project can change the permissions granted to a user in the project. The changePermissions operation in the Projects service is used to do this. It takes a projectid, a list of users, and a new set of permissions. It returns an array of results indicating the outcome of each requested change.

Project Profile Management

The Projects service supports the operations described in the profiles description to allow applications to manipulate project profiles. Only the owner of a project can change the contents of its profile.

Administrative Operations

There are a few more operations that are restricted to administrators.

There are profile operations to add, remove and change attributes to the project profile schema.

There is an operation, addUsersNoConfirm to add users to a project without requiring the users being added to confirm the change.

These are documented below.

Circles

Circles are groups of users used to share the contents of experiments and libraries among users. One can think of them as lightweight projects of collaborating researchers who are working together on related experiments.

The key distinction between the two kinds of user groups is that a project confers access to the testbed resources in the large based on delegation of trust. A circle confers rights to specific experiments and libraries. Project membership is a prerequisite to accessing the testbed at all; circle memberships control access to specific abstraction instances inside the testbed.

Once the testbed administration has placed their trust in a user through the project abstraction, they are free to collaborate without any further significant administrative oversight through the circles system.

Projects and circles are related. Each project has a linked circle that contains all the users who are members of the project. The system keeps that circle and project membership synchronized. One can think of assigning the rights to manipulate experiments and libraries to projects as existing Emulab code does. Under the covers it is the linked circle that conveys the rights.

Whenever a user is created, a circle, named userid:userid, is also created containing only that user. One can use this circle to assign rights to a user and only that user. This circle behaves like all other circles, but may seem special because of the membership and permissions assigned to it. There is only the one member, and that member does not have the rights to modify the circle membership. The system removes this circle when and if the user is removed.

Circle Names

Every circle has a unique circleid that names it in the testbed. Circle names are scoped by either userids or projectids. A circleid has the form of either:

• userid:local_name
• projectid:local_name

So there may be circles named some_user:students and some_project:students. They are distinct.

That scoping serves 2 purposes: disambiguating common names and providing a way to distinguish certain names. We expect that many users will set up circles with local names like test, students, assistants and the like. The user interfaces built on the SPI can scope such names by the userid creating them and hide the prefix unless it is necessary to disambiguate.

When a user creates a name in scoped by a project name, it is functionally equivalent to a userid-scpoed name, but applications may choose to distinguish them. One can easily imagine that some_user:students and some_project:students refer to different sets of users and that the project-prefixed circle is administered more carefully and used more widely. The right to create a circle in a project's name space - prefixed by the projectid - is controlled by project permissions.

Circle Permissions

Like projects, each user in a circle may have one or more of the following permissions that define the operations that user can carry out on the circle itself. The permissions are:

Permission Name	Meaning
ADD_USER	This user may yequest that a user be added to the project or confirm a request by a user to join the project
REALIZE_EXPERIMENT	This user may allocate resources to an experiment and carry it out so that it is accessible to the members of this circle
REMOVE_USER	This user may remove a user from the project. Any objects they have created in the project's namespace remain

The REALIZE_EXPERIMENT permission means that a user can carry out an experiment under this circle. This means members of the circle will:

• have access to the running experiment - e.g., accounts on computers, permissions to connect to orchestration software, etc.
• have access to data collected from the experiment

Creating A Circle

A user creates a circle using the createCircle operation on the Circles service. Mechanically, the procedure to create a project is very similar to creating a user or project. An application will:

• Call the getProfileDescription operation on the Circles service to get an empty circle profile
• Gather data from the user to fill in the circle profile, including non-optional fields and proper formatting
• Call the createCircle with a project name from the user and that user as the project's owner. (Administrators can create projects owned by other users).

Unlike when a user creates a project, when createCircle completes successfully, the circle is ready for use.

Adding Users To A Circle

As with projects, users can become members of a circle by requesting to join or or by being invited to join. Because joining a circle changes the rights of a user, either of these routes must be endorsed by both the user and someone with relevant permissions in the circle. The difference is only the order in which the endorsements are gathered.

When a user finds a circle the would like to join, usually through some out of band mechanism, they call the joinCircle operation on the Circles service. This registers the user's intention to join and sends a notification to members of the circle who have the right to add users to it. This notification includes a challenge that is similar in format to the addUsers challenge for projects. As with that operation, an application can include a URL prefix that will be prepended to the challenge in the notification.

One of the users receiving the notification can then call joinCircleConfirm with the challenge and a list of permissions that the user will be assigned. When that operation completes, the user is a member of the circle with the associated permissions. The user calling joinCircleConfirm must have the ADD_USER right and similarly cannot confer more rights than they have.

When a user with the ADD_USER permission wants to invite another user to join the project, the inviting user calls the addUsers operation with the circleid, a list of users, proposed permissions, and an a URL prefix that serves the same purpose as the prefix on joinCircle. When the operation succeeds, each invited user receives a notification containing a challenge (and descriptive text about the circle). If the invited user does wish to join, they call the addUserConfirm operation with the challenge. When that operation succeeds, they are a member of the circle.

A user with the REMOVE_USER permission can unilaterally remove other users from the circle by calling the removeUsers operation. The owner of a circle cannot be so removed.

Circle Ownership

When a circle is created, an owner for that circle is designated. It is generally the user who successfully called createCircle, though ownership may be designated for projects created by administrators. Ownership primarily means that the owner cannot be removed from the circle and controls the profile contents.

The owner (and administrators) can change the owner of a circle by calling the setOwner operation in the Circles service.

Changing Circle Permissions

A user that has both ADD_USER and REMOVE_USER permissions to a circle can change the permissions granted to a user in the circle. The changePermissions operation in the Circles service is used to do this. It takes a circleid, a list of users, and a new set of permissions. It returns an array of results indicating the outcome of each requested change.

Project Profile Management

The Circles service supports the operations described in the profiles description to allow applications to manipulate project profiles. Only the owner of a circle can change the contents of its profile.

Administrative Operations

There are a few more operations that are restricted to administrators.

There are profile operations to add, remove and change attributes to the circle profile schema.

There is an operation, addUsersNoConfirm to add users to a circle without requiring the users being added to confirm the change.

These are documented below.

Experiments

The experiment abstraction encapsulates the layout, procedure, data requirements, and constraints on an activity a researcher using to play with ideas or test a hypothesis. An experiment is realized by DETERLab into an environment that meets those requirements. Realizing an experiment allocates resources in the testbed and grants access to the members of the circle in which the experiment is realized.

Experiments are the unit of testbed activity that are shared between users for understanding ideas and reproducing results.

The layout, procedure, data requirements and constraints on an experiment are sub-abstractions of an experiment called aspects. An experiment does not necessarily contain all aspects. When a researcher first comes to DETERLab, their models and ideas are likely to be loosely defined. We expect them to realize experiments that have only layout aspects. As their ideas become more concrete and their results more stable, the other aspects become more fleshed out.

Ee present a worked example of the layout aspect that illustrates this.

Experiments also have profiles attached to them so that other users can understand the purpose and goals of a project without investigating the aspects in detail.

Aspects

The SPI treats aspects as first class objects that can be directly manipulated. Users can add or remove them from experiments, and aspects interact with one another. One can specify a data gathering or procedure aspect that is inconsistent with the layout aspect, and the SPI will find the discrepancy.

Internally, aspects are plug-in modules of code, written to a well-defined interface, that cooperate to

• Generate experiment realizations
  • Build layouts for experimentation and data gathering
  • Control virtualization and simulation implementations
  • Create layouts in the underlying hardware
• Orchestrate experiments
  • Carry out procedures
  • Collect data from experiments
• Present data
  • Collect datasets
  • Visualize ongoing and completed experiments

To support the ongoing research in all these areas, and in areas we do not know about yet, the aspect interfaces are open, and the SPI implementation can easily import code written to it. We expect to add SPI interfaces to dynamically add an aspect implementation to a running testbed.

Because research on individual aspects is ongoing, the SPI presents fairly generic interfaces to them. Each aspect is specified by a type, sub-type and name. The operation of the aspect is controlled by a data block (often a file) attached to the (type, sub-type, name). The meanings of sub-types, names, and the interpretation of data blocks within aspects are controlled by the aspect.

To allow aspects to continue to be developed, the SPI minimally constrains aspect configuration. The data block passed to an aspect is generally a configuration in the aspect's specific configuration language. These are specified individually for each aspect.

When an aspect is added to an experiment, the SPI starts a transaction across the various aspect implementations present in the experiment and being added to the experiment. Each is given a chance to inspect any new instances of the aspect being added to the experiment and they may query the current experiment contents? looking for any inconsistencies with other aspects. When new instances have been inspected, the transaction is closed, giving all aspects (new and old) a chance to veto the addition. This same transaction protocol is followed when aspects are changed or deleted.

Layout Aspect

The layout aspect specifies the elements and interconnections of an experimental environment. We present it in some detail, both because researchers will use it practically and as an example of a fleshed out aspect.

Experiment Names

Like circles, experiments are named within the scope of either a user (prefixed by userid) or project (prefixed by projectid). The right to create an experiment in a project is controlled by the CREATE_EXPERIMENT project permission.

Experiment Permissions

As with other abstractions, access to experiments is controlled by permissions. These permissions are assigned to circles rather than individual users. Because each user is the sole member of an immutable circle named userid:userid permissions can be assigned per-user by assigning to that circle. Similarly, assigning to the projectid:projectid circle assigns permissions to all members of a project.

The permissions relevant to project are:

Permission Name	Meaning
MODIFY_EXPERIMENT	Circle members can change aspects of an experiment
MODIFY_EXPERIMENT_ACCESS	Circle members can change the permissions of other circles
READ_EXPERIMENT	Circle members can read experiment aspects and information bout access control

Experiments are realized in circles. A user may realize an experiment - alloate resources to it and set it running - if that user holds the REALIZE_EXPERIMENT permission to the circle and the READ_EXPERIMENT permission to the experiment.

Creating A New Experiment

A user creates a circle using the createExperiment operation on the Experiments service. Mechanically, the procedure to create a project is very similar to creating a circle or project, though aspect data is also included. An application will:

• Call the getProfileDescription operation on the Experiments service to get an empty experiment profile
• Gather data from the user to fill in the experiment profile, including non-optional fields and proper formatting
• Call the createExperiment with an experiment name from the user and that user as the experiment's owner. (Administrators can create projects owned by other users). Additionally, initial aspect definitions and initial access control lists may be specified.

When createExperiment returns the experiment can be further manipulated. An experiment with no access control lists and no aspects is a valid experiment. Experiment owners always implicitly have all permissions to the experiment as well as the rights to control ownership and profile contents.

Because we expect some researchers to build some experiments incrementally from scratch, experiments are very liberal about their contents. While an experiment with no access control lists and no aspects is valid, it is not very interesting to realize it until it has some aspects.

A user can also specify all the experiment aspects and access control lists when createExperiment is called.

Adding and Changing Experiment Aspects

A user that is a member of a circle that has the MODIFY_EXPERIMENT permission on an experiment can add or remove aspects from that experiment. The operation to add aspects is addExperimentAspects in the Experiments service. Changing existing aspects is done through changeExperimentAspects.

The parameters to addExperimentAspect are arrays of the type, subtype, name and data block. Each of these are defined by the various aspects. The layout aspect defines one set of properties. In addition, adding one aspect may result in additional subaspects being added as well. The layout aspect does this as well.

There is a default aspect implementation that simply copies the data block of the addExperimentAspects call and stores it. When an otherwise unknown aspect type is requested, this implemetation is called. The intent is that service developers can copy data in and out of experiment definitions by picking an aspect type name.

The changeExperimentAspects takes the same list of type, sub-type, name, and data block tuples, but in this case the data block is an aspect-specific update language. The intention is to allow aspects to define update protocols. To replace an aspect a user can generally call removeExperimentAspects and then addExperimentAspects to replace the removed aspects. The layout aspect does not define a change protocol. The default aspect implementation simply copies the contents of the data block over the existing data (if any).

Adding and Changing Experiment Access Control Lists

All experiment permissions are controlled by access control lists (ACL) that map circles to experiment permissions. The only exception to this is the owner of the experiment who always has all permissions. Any user who has MODIFY_EXPERIMENT_ACCESS permissions to an experiment can change its ACLs.

A user can set the ACLs on createExperiment by providing a list of (circle, permissions) pairs, where permissions is itself a list of permissions. Any errors in specifying the ACLs will cause the creation to fail.

A user can call changeExperimentACL with a list in the same format. New entries will be added, existing entries will be overwritten, and entries with an empty permission list will be removed. A partial success is possible and the result of each change is returned.