The DETER distribution includes a small set of tests to verify basic functionality of the newly-installed testbed: {{{ cd ~/testbed/testsuite/deter ./tbcheck }}} should produce (after a fair amount of other logging) {{{ basic2 passed all phases basic passed all phases toofast failed preparse miniTbcmd2 passed all phases cbr passed all phases }}} ''tbcheck'' is a tcl expect script which exercises the testbed using this short series of experiments, attempting to: swap each in; test link behavior; verify other properties of the instantiated experiment; and finally swap out. Not all tests will pass all test phases. * ''basic'' checks that an experimental node's group file includes the project group. It also includes two links with different delays, and one at a lower bitrate than the others. ''basic'' should pass all phases. * ''basic2'' checks than an experimental node properly mounted the user's home directory, and should pass all phases. * ''cbr'' includes a number of links with delay, traffic agents, and link events. The test verifies that the testbed correctly creates a log file for one of the events. * ''miniTbcmd2'' includes a pair of tar archives to be extracted on one of the experimental nodes, and a startup command for that node. * ''toofast'' is supposed to fail to swap-in (according to emulab) because one of the links is too fast, but in practice fails due to a parsing error. This is the only one of the five tests which is intended to fail. The series requires at least six experimental nodes, assuming one node available for delay use has four experimental interfaces.