== Overview == Since users is the file server, it is important that we install and reboot it first. We can then proceed with the boss installation, since part of the boss installation involved mounting directories exported during users setup. * Users *MUST* be installed first. * Internal networking *MUST* be functional. * Once the testbed software has been built on users, log into boss. == Make sure your network is working first == All network traffic between boss and users goes by default over their private networks. It is important that your boss and users images are able to ping each other through router. == Build Process == The original installation documentation is here. I strongly recommend reading through it in order to understand where the DETER install process is evolving from: https://users.emulab.net/trac/emulab/wiki/InstallRoot == Getting access to the source code == We currently use a private github repository for the testbed codebase. Please contact us for access. == First Login to an image == Boss and Users come with a default 'deterbulid' account. The password is 'deterinavm'. For Router, the root account has the same password. When you first login to the Users image, you will be prompted to change your password and then for details about your Github account. When you first login to the Boss image, you will be told that your home directory does not exist. Do not worry about this. You will be able to mount the home directory for the DETER build user once Users is installed (I export the repo over NFS in order to reduce the confusion of having two repos on two machines using the same definition files). == Configuring External Network Access == You will need to configure both the Boss and Users VM images with external, static IP addresses. The configuration is at the top of the file '/etc/rc.conf' and the default External interface is 'em0' for both images. Make sure to put in default route. The initial name server configuration is set to use Google's 8.8.8.8 out of the box. The testbed install process will change resolv.conf to use the nameserver on Boss once the installation is complete. You can find more details about configuring FreeBSD networking. [http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/config-network-setup.html FreeBSD Handbook]. Once you have edited '/etc/rc.conf,' you can test the setup by issuing the following commands: {{{ service netif restart service routing restart ping -c1 www.google.com }}} == Testing Internal Network access == The install process depends on the internal networking and Router image being operational. From Users, try pinging Router and then Boss: {{{ ping -c1 192.168.253.254 # Router's address on the internal Users network ping -c1 192.168.252.1 # Boss's internal address }}} From Boss, try pinging Router and then Users: {{{ ping -c1 192.168.252.254 # Router's address on the internal Boss network ping -c1 192.168.253.254 # Users's internal address }}} == Creating a site definitions file == When you have external network access working for your Users machine, you should be able to SSH in now. In ~/testbed there is a file called defs-example-deter. Change this file to reflect your site and save it as defs-. We have slimmed down the defs file so this should be self explanatory. == Building the testbed software on Users == Login as 'deterbuild' with the password 'deterinavm' to build the testbed code. Be sure to pull down the latest source: {{{ cd testbed git pull }}} Create the object tree directory. {{{ mkdir ~/obj }}} Now go into the ~/obj directory. {{{ cd ~/obj ../testbed/configure --with-TBDEFS=/home//testbed/defs- }}} This will create the object tree for the testbed. The install process is handled by two scripts. One is boss-install and the other is users-install, for boss and users. '''You must install and reboot the users node first.''' {{{ cd ~/obj/install sudo perl ./[boss|users]-install }}} If the install process complains about an outdated metapackage, please refer to the next section. The output of the build script will look like this: {{{ [jjh@users ~/obj/install]$ sudo perl users-install WARNING: This script is ONLY intended to be run on a machine that is being set up as a dedicated users node. Continue? [y/N] y Creating users and groups | Creating tbadmin group [ Succeeded ] (16:00:42) +-----------------------------------------------> [ Succeeded ] (16:00:42) Creating /usr/testbed [ Succeeded ] (16:00:42) Setting directory permissions | /usr/testbed [ Succeeded ] (16:00:42) | /users [ Succeeded ] (16:00:42) | /proj [ Succeeded ] (16:00:42) | /groups [ Succeeded ] (16:00:42) | /share [ Succeeded ] (16:00:42) +-----------------------------------------------> [ Succeeded ] (16:00:42) Installing main package [ Skipped (Package already installed) ] Applying patches [ Succeeded ] (16:00:42) Adding testbed content to rc.conf [ Succeeded ] (16:00:42) Adding boss/ops/fs IP addresses to /etc/hosts [ Succeeded ] (16:00:42) Checking to make sure names for boss/ops/fs resolve | users.mini-isi.deterlab.net [ Succeeded ] (16:00:42) | users [ Succeeded ] (16:00:42) | ops [ Succeeded ] (16:00:42) | fs [ Succeeded ] (16:00:42) | boss.mini-isi.deterlab.net [ Succeeded ] (16:00:42) | boss [ Succeeded ] (16:00:42) +-----------------------------------------------> [ Succeeded ] (16:00:42) Configuring sendmail | Setting up /etc/mail/local-host-names [ Succeeded ] (16:00:42) | Setting up mailing lists | | Creating /etc/mail/lists [ Succeeded ] (16:00:42) | | Creating mailing list files | | | testbed-ops [ Succeeded ] (16:00:42) | | | testbed-logs [ Succeeded ] (16:00:42) | | | testbed-www [ Succeeded ] (16:00:42) | | | testbed-approval [ Succeeded ] (16:00:42) | | | testbed-audit [ Succeeded ] (16:00:42) | | | testbed-stated [ Succeeded ] (16:00:42) | | | testbed-testsuite [ Succeeded ] (16:00:42) | | | testbed-ops [ Skipped (File already exists) ] | | | testbed-logs [ Skipped (File already exists) ] | | +-------------------------------------------> [ Succeeded ] (16:00:42) | | Adding lists to /etc/mail/aliases [ Succeeded ] (16:00:42) | | Running newaliases [ Succeeded ] (16:00:42) | +---------------------------------------------> [ Succeeded ] (16:00:42) +-----------------------------------------------> [ Succeeded ] (16:00:42) Setting up exports | Creating /etc/exports.head [ Succeeded ] (16:00:42) | HUPing mountd [ Skipped (mountd not running) ] +-----------------------------------------------> [ Succeeded ] (16:00:43) Setting up NFS mounts [ Skipped (FSes are local) ] Setting up syslog | Editing /etc/syslog.conf [ Succeeded ] (16:00:43) | Creating /var/log/tiplogs [ Succeeded ] (16:00:43) | Creating log directory [ Succeeded ] (16:00:43) | Creating log files | | /var/log/logins [ Succeeded ] (16:00:43) | | /var/log/tiplogs/capture.log [ Succeeded ] (16:00:43) | | /var/log/mountd.log [ Succeeded ] (16:00:43) | | /usr/testbed/log/pubsubd.log [ Succeeded ] (16:00:43) | | /usr/testbed/log/elvin_gateway.log [ Succeeded ] (16:00:43) | +---------------------------------------------> [ Succeeded ] (16:00:43) | Setting up /etc/newsyslog.conf [ Succeeded ] (16:00:43) +-----------------------------------------------> [ Succeeded ] (16:00:43) Adding cron jobs | Editing /etc/crontab [ Succeeded ] (16:00:43) | HUPing cron [ Succeeded ] (16:00:43) +-----------------------------------------------> [ Succeeded ] (16:00:43) Editing /usr/local/etc/sudoers to allow wheel group[ Succeeded ] (16:00:43) Setting up Samba | Installing smb.conf[.head] [ Succeeded ] (16:00:43) +-----------------------------------------------> [ Succeeded ] (16:00:43) Allowing root ssh | Permitting root login through ssh [ Succeeded ] (16:00:43) | Making root's .ssh directory [ Skipped (File already exists) ] | Installing temporary root ssh public key [ Succeeded ] (16:00:43) +-----------------------------------------------> [ Succeeded ] (16:00:43) Setting up rc.d scripts | Installing testbed RC scripts | | Removing port version of elvind.sh [ Skipped (File does not exist) ] | +---------------------------------------------> [ Skipped ] (16:00:43) +-----------------------------------------------> [ Skipped ] (16:00:43) ---------------------------------------------------------------------- Installation completed succesfully! Please reboot this machine before proceeding with boss setup Local mailing lists have been created, with no members, in /etc/mail/lists . Please add members to the following lists: testbed-ops@mini-isi.deterlab.net testbed-logs@mini-isi.deterlab.net testbed-www@mini-isi.deterlab.net testbed-approval@mini-isi.deterlab.net testbed-audit@mini-isi.deterlab.net testbed-stated@mini-isi.deterlab.net testbed-testsuite@mini-isi.deterlab.net testbed-ops@mini-isi.deterlab.net testbed-logs@mini-isi.deterlab.net [jjh@users ~/obj/install]$ }}} == Setup mailing lists on users == You will have to add someone to the mailing lists in '''/etc/mail/lists''' on users after the install: {{{ users# cd /etc/mail/lists users# foreach i ( `ls testbed-*` ) foreach? echo "admin@yoursite.net" >> $i foreach? end }}} == Updating the DETER meta packages == The dependencies are installed via a special meta package. This is already installed on the stock images, but if you ever need to update: {{{ cd testbed/install/ports sudo make install cd /usr/ports/misc/instant-deter sudo make deinstall sudo make reinstall }}} == Updating the codebase == In order to update the codebase, running the install script is not necessary. {{{ cd ~/testbed git pull cd ~/obj ../testbed/configure --with-TBDEFS=/home/jjh/testbed/defs- gmake gmake [boss|users]-install }}}